Terra-cotta strawberry planters are good for more than just planting pockets of herbs. Create a rustic garden fountain with just a few plumbing parts, a pump, and some terra-cotta. Because strawberry jars are handmade and somewhat unique, buy the strawberry jar first, then fit the other terra-cotta elements to it.
Supplies Required
Step-by-Step Instructions
Once you have all the necessary parts, you’ll just need to drill a few holes and glue the pieces together. Follow these steps to build a terra-cotta fountain in the span of a weekend.
Step 1: Drill Hole in Saucer
Start by putting on safety glasses. Drill a hole through the center of the terra-cotta saucer. It may be easier to drill through the terra-cotta if you soak the saucer overnight.
Step 2: Drill Holes in Azalea Pot
Using a masonry drill, bore four to six holes 1 inch from the rim of the azalea pot for aeration. Using a file, notch azalea pot for an electrical cord to fit through. Again, it may be easier to drill holes through the terra-cotta if you soak pot the night before.
Step 3: Plug Hole
Using silicone glue, secure plastic saucer into a large tapered bowl to plug hole.
Step 4: Install Pipe Fittings
Install brass pipe fittings (male input with barb, reducer, and flare—which adjusts the height of the water spray) with 3/8-inch vinyl tubing through the bottom of the terra-cotta saucer.
Step 5: Assemble Fountain
To assemble fountain: Place the pump in the base; attach vinyl tubing to pump; and thread vinyl tubing through the hole in the bottom of the azalea pot, lining up the notch with the cord. Snake vinyl tubing through the strawberry jar and set on top of upside-down azalea pot. Attach vinyl tubing to the end of the pipe fittings, and rest terra-cotta saucer on top of the strawberry jar.
Step 6: Add Stones and Plants
Place fountain near an electrical source. Add pebbles and aquatic plants as desired. Be sure to purchase plants that thrive with their roots in water. Add stones to secure the roots.
